20" Caged Ceiling Fan with Light - Sofucor Low Profile Small Ceiling Fan Includes 6 LED Bulbs, 6 Speed Settings, Remote Control - Perfect for Kitchen, Bedroom, Dining Room, Office & Small Spaces

I purchased this fan due to the super low price from Sofucor's Amazon Store. Frankly my expectations were low and thought I would just doubted them based on price thinking it was too good to be true. Sofucor made me a "fan" of their company (excuse the pun), because they delivered on everything!Here's what won me over.1. They're right its easy to install. I installed the fan in less than 15 minutes after removing the old ceiling fan. Everything you need is the box except the screw drivers.2. The instructions had QR codes to easy to follow videos for installation.3. The old fan I replaced was a Hampton Bay Fan that came with the house used 3X times more power than the Sofcur's.4. Sofucor's remote is a little different to get used to but at least it works! The Hampton Bay remote didn't work. It require me to run downstairs turn off the breaker and by the time I returned to the fan with the remote the internal timer won't allow me to program it. Sofucor's worked out to the box!5. Sofucor's fan is quiet. - really quiet.6. Sufcor's fan moves the air better than most I seen or used.7. The fan looks GREAT. The wood is real, although a light weight wood it's attractive. The previous one from Hampton Bay had blade made of press board.Suggest Areas for Improvement.1. Please pay a native English speaker to adjust the wording in the user manual. There are many errors which include spelling, dropped phrases, and grammar issues. I am not one to critically analyze anyone's English skills because my own are so poor. I believe correcting some of the issues in your installation manual would show off your products quality better.2. Page 8 of the Use and Care Guide for the KBS-52245 showed a medal hanger hook on the the hanger plate. Specifically in photo 13 there is wire to temporarily hang the motor while wiring. That wire wasn't on the unit I ordered.3. On page 7 there is a picture of a wire to connect the LED's to the cable. The unit I received didn't have th cable extending for the LED plate. The connect was on the edge of the LED plate. The figure on page 7 photo #7 should be corrected.In summary, I love the fan and now am a FAN of Sofucor's ceiling fans. I will be buying a few more.I researched all kinds of different fans and decided upon this beautiful fan. Having three 60" fan blades vs. all the other fans I've previously had that have had five smaller blades is an advantage. Much easier to clean and the wooden blades are light but sturdy. The fan blades were what initially caught my eye as I thought they were really cool looking, and they do look really nice in person. The fan is powered by a very quiet DC motor (can't even hear any motor noise) and it pushes out quite a bit of air. I was pretty picky on wanting a fan that also provided a good amount of light and this fan gets pretty bright, but you can easily dim it via the remote control. The fan spins with no vibration or wobble, as it's very well balanced.Some previous reviewers have said this fan was easy to install and some others have said it was harder to install. After getting confused reading the written manual, I reviewed the online installation video and that made it much easier to understand how to install the fan. Just Google it and you should find the video. Watch the video first! I've installed a few fans in my lifetime and this fan took me longer to install than some others, but it was worth the effort.Some previous reviewers have also complained about needing to use the remote as the primary way to operate the fan. This isn't an issue for me. The remote has a remote receiver that relies upon the remote to operate the fan. Just leave the wall switch turned on and then use the remote to turn the fan on / off and to adjust the fan speed and light brightness.My wall switch had a black wire (hot), white wire (neutral) and a red wire. However, the remote receiver I needed to wire to only had a black and white wire. There are different electrical configurations, so this part was a bit confusing. I finally figured out that I just needed to cap off the red wire (not needed) and only connected the black and white wires.At first, the fan worked but the light did not, the remote control would not operate the light. I contacted customer service and as other reviewers have mentioned, they are pretty responsive to technical issues and questions. They sent me out a replacement remote and receiver pretty quickly (arrived in 2-3 days), but it was the wrong remote receiver, so they sent me out the correct receiver and that fixed the problem. It was worth the wait since this is a cool fan.Pros:*Extremely quiet on all fan settings*Dimmable LED in warm and cool white*Fan blades are very nice and have a carved wood look, compared to the generic blades on most fansCons:*No memory. If you turn the fan off at the switch (not using the remote) when you turn it back on it reverts to default (light on, fan off) no matter the setting you had previously.*You have to use the remote to turn on the fanSpecs:*Hangs 12inches from ceiling to bottom 9f light.UPDATED REVIEW:I returned the fan through amazon and ordered a replacement (I did not go through the seller's customer service). The second fan that arrived has all the right parts and the installation was a breeze (ha, ha). It looks great and it's completely silent. I am updating to 4 stars not 5 because of the initial problem with parts that (based on other reviews) happens to more people than just me.ORIGINAL REVIEW (1 star)The fan looks great but unfortunately the attached blades and screws were wrong.In the first picture you can see the blades are shaped to fit together perfectly, but in the second you can see why it's impossible: there is a large rod going down the middle that prevents them from touching with the corners.Anyway, the screws that were attached were too short, you can see in the third picture that they hardly protrude through the blade and that's still without the required washer and metal plate.I could fix it by cutting the middle circle out of the blades and using longer screws but I'm not doing this to a $200 product. Returning to amazon.